用户工具

站点工具


keyboards:chicory

**这是本文档旧的修订版!**

Chicory

Author: YANG

MCU: Atmega32u4

Some infomation for debug \(已公开的烂大街情报)

COL 0 1 2 3 4 5 6 7 8 9 10
PIN D6 D7 B4 B5 B6 C6 C7 E2 F7 F6 F5
ROW 0 1 2 3
PIN F4 F1 F0 E6
Caps Lock LED Backlight WS2812 Data WS2812 Power Bluetooth Power
B7 D0 D1 D4 D5

ChicoryBLE快速入门/User Guide of Chicory BLE(由ProD提供)

Chicory固件的两个重要更新内容:

1、增加windows下电量显示功能,win10版本为1809的话可以在系统蓝牙设置下直接看到剩余电量,其他windows版本可以使用类似“Bluetooth Battery Monitor”的软件。
2、增加“lock mode”,按下后蓝牙关闭,按下“F”和“J”且同时“G”和“H没有按下时可重新开启蓝牙,或者重新插线来重启蓝牙。

Important update of firmware in recent days.

a. Add battery status display function: you can check battery status in “Control Panel-Bluetooth Setting” under Windows 10 (Ver. 1809) directly. For other Windows version, use software like “Bluetooth Battery Monitor”, etc.
b. Add “Lock Mode”: Bluetooth will be shut down when this “Lock Mode button” pressed. Only button “F” and “J” (not including “G” & “H”) being pressed will re-activate the bluetooth function. You can also replug the cable to restart the bluetooth.
More functions will be available in the future and thanks to u/yangdigi for continuous update


固件设置

Chicory固件使用tmk,在ydkb.io上进行设置,常见的功能均可通过网页进行设置。
配列设置完毕后右上角选择下载-下载刷机工具及hex到桌面进行刷机。按住ESC插入数据线进入刷机模式。

How to build and flash firmware to this keyboard?


a. Access to ydkb.io, this website offers user-friendly visualization interface for setting multi-funtional layers of your need.
b. Select “Download” on the top right corner to download the hex file and tools, decompressed the tools kit you download and run “ydkbs-reflash.exe”, drag hex file to the program, click the right bottom. Next step, long press “ESC” and plug the cable, then release esc to enter flashing mode until flash done.


提醒:

如果使用6.25u空格,空格位置的外壳螺丝必须使用螺丝包里黑色超薄头螺丝,普通螺丝头会和卫星轴的钢丝冲突。

Attention:

If you want to use regular spacebar (6.25U), pay attention to the screw that mount on the plate where close to the spacebar, strongly suggest that use the thin-hear screws in the pack attached, otherwise will affect installation of the spacebar stabilizer.


注意:

建议使用电脑的usb口或者正规的5v充电器来充电,如果出现充电不当导致蓝牙失效的情况,后果自付。

Warning:

Use computer usb port or licensed charger to charge the battery, all consequences of improper use will be borne by users themselves.

keyboards/chicory.1548774087.txt.gz · 最后更改: 2019/01/29 10:01 由 127.0.0.1